Why Is It Difficult For Airplanes To Land/Take Off When It’s Too Hot?

Table of Contents (click to expand)

An airplane flies because it has a lot of force pushing it up. This force is called lift. The more air molecules an airplane’s wings hit, the more lift the airplane gets. Hot air has less air molecules than cold air, so it is harder for an airplane to generate lift when the temperature is high. Airlines often don’t fly when it is very hot because it is harder to take off and fly.

The reason is simple: the more molecules your plane wings hit, the more upward force (or lift) is generated, which is exactly what you want. That’s why it’s undesirable to takeoff on particularly hot days, because air density is lower.

In order to understand why excessive heat creates problems while a plane lands or takes off, it’s imperative that we first understand how an airplane flies in the first place.


How Do Airplanes Fly?

You might have heard people answering this question with the classic ‘the plane’s wings generate lift, which helps it to fly’ explanation. Although this is not incorrect, it doesn’t present the whole picture, especially for someone who doesn’t understand what ‘lift’ is all about.

Well, the flying of a plane has everything to do with the momentum principle, which states that the total force on an object is equal to the rate of change of momentum (where momentum is represented by the product of mass and velocity). This principle can actually be deduced in the following manner:

Now, consider the change of momentum of the air molecules colliding with the airplane as it moves through the air. As the plane wings hit these molecules, they change momentum, which obviously requires some sort of force.

Remember Newton’s third law of motion? For every action, there is an equal and opposite reaction. As such, the force that the wings exert on the molecules is of the same magnitude as the force the molecules exert on the wings. This provides an upward force to the wings (which people call ‘lift’), as well as a backward force (called ‘aerodynamic drag’ or simply ‘drag’). Both of these forces occur in pairs. There can be no lift without drag.

One does not simply hope to get lift without getting some drag too meme

Lift helps the plane fly, while aerodynamic drag constantly slows it down. As a plane must move to generate lift, it requires some external thrust, which helps it go really fast. Not only that, but you also need thrust to counteract the drag that the plane experiences once it’s in the air and flying.

Also Read: How Do Fighter Jets Fly Upside Down?

How Is A Plane’s Flight Affected By Temperature?

You might already know that if the temperature is high in a particular region, then the air density in that region would be low. In other words, the higher the temperature, the lower the air density, or you could say, the thinner the air.

Density temperature

Now, thin air means it has fewer air molecules. This is a problem. Why?

Because in order to generate a large amount of lift, you need a large amount of air molecules. If you were just flying a kite, then you wouldn’t require many air molecules, but when we’re talking about flying an airplane, i.e., an enormous metallic tube that contains a couple hundred passengers inside, you obviously need a huge number of air molecules around your plane, regardless of whether you’re landing or taking off.

The reason is simple: the more molecules your plane wings hit, the more upward force (or lift) is generated, which is exactly what you want. That’s why it’s undesirable to takeoff on particularly hot days, because air density is lower.

In addition to that, if the air density is lower, then the combustion of the fuel is less efficient, which would mean less generation of power from the jet engines. This is another drawback of taking off on a particularly hot day.

But you can’t change the weather, right? So you have to find ways to tackle this issue. The question is, what can you do?

Longer Runways Help

There are several airports around the world that fall under the category of ‘hot and high’ airports – airports where the ambient temperature is unusually high and they are located at high elevations (at least, higher than typical airports).

Denver airport
Denver airport is one of the many ‘hot and high’ airports around the world. (Photo Credit : Pixnio)

If you want to land your plane in one of those ‘hot and high’ airports, you will also need longer runways. That way, you’d be able to generate more momentum before taking off, which would provide more energy for the subsequent climb into the sky (to read more about longer runways, check out this article).

Reduce The Load Of The Plane

Reducing the plane’s overall load helps it to take off relatively easily on a hot day, as a lighter plane needs less lift than a heavier plane. That’s why airlines often don’t fill their seats completely at certain airports on particularly hot days. Also, they may carry less fuel. They may then land and refuel at a cooler airport. Easy peasy!

Don’t Take Off In The First Place

That’s quite a neat option, wouldn’t you say?

The day was very hot i grounded all my planes meme

If the day is really hot and you’re not sure if the length of the runway will give you enough momentum before takeoff, it’s better to stay grounded than to risk flying. In fact, that’s what most airlines at certain airports do during peak summers.

Also Read: Why Do Some Airports Have Unusually Long Runways?

How well do you understand the article above!

Can you answer a few questions based on the article you just read?

References (click to expand)
  1. Momentum, Work and Energy - Galileo and Einstein. The University of Virginia
  2. Theory of Flight. web.mit.edu
  3. Aeronautics - What Makes An Airplane Fly - Level 1. Florida International University
  4. Effects of changes in air pressure and density on the human .... The University of Arizona
Help us make this article better
About the Author

Ashish is a Science graduate (Bachelor of Science) from Punjabi University (India). He spearheads the content and editorial wing of ScienceABC and manages its official Youtube channel. He’s a Harry Potter fan and tries, in vain, to use spells and charms (Accio! [insert object name]) in real life to get things done. He totally gets why JRR Tolkien would create, from scratch, a language spoken by elves, and tries to bring the same passion in everything he does. A big admirer of Richard Feynman and Nikola Tesla, he obsesses over how thoroughly science dictates every aspect of life… in this universe, at least.

.