Coal mining involves extracting coal from the ground’s surface or from deep underground. The industrial revolution was only possible due to the utilization of coal to power steam engines. Coal obtained in different places is not the same and varies widely depending on the nature of the soil and geographic conditions. There are two major types of coal mining: underground mining and surface mining.
Coal mining satiates roughly 1/4 of our global energy demands, and it is coal that has powered America’s power needs for decades. This is not only true of the US; Europe has also reaped the rich benefits of coal. The industrial revolution was only possible due to the utilization of coal to power steam engines. These steam engines helped in the rapid expansion of international trade, as they played a critical role in the development of railways and steamships.
Coal mining (also called colliery) is the process of extracting coal from the ground’s surface or from deep underground. Coal miners literally raze entire mountain ranges to feed our insurmountable desire for cheap energy. There’s something brutally simple about coal mining. Take away the monstrous-but-sophisticated machinery and eco-friendly-but-incredulous marketing jargon and it’s the same murky, perilous job that it’s always been—ﬁnd the black stuff and dig it up for consumption by power plants. Let’s now look into more detail of what coal actually is and how it is mined.
How Is Coal Formed?
Coal is formed when dead plants and other organic matter is submerged in swamp environments and subjected to the geological forces of pressure and heat over millions of years. Over time, this organic matter transforms from moist peat into coal—an energy- and carbon-rich dense black or brownish-black sedimentary rock. Coal obtained in different places is not the same and varies widely depending on the nature of the soil and geographic conditions.
Coal can be broadly classified into four types: lignite, sub-bituminous, bituminous, and anthracite, in ascending order of carbon and energy content. Most of the coal burned in power plants in the US are either bituminous or sub-bituminous.
Coal Mining Process
The US burned roughly 700 million tons of coal in 2016—enough to fill a standard railroad car every 4 seconds. 90% of that coal consumption went into the generation of electricity, while the rest (just 10%) was burned for other industrial/commercial requirements. All of this coal comes from mines that are either (near) surface or underground. Both forms of mining cause critical ecological shifts, not only killing dozens of miners every year, but also afflicting ill health effects on infants born in the proximity of colliery operations.
Surface mining and underground mining are the two major schools of coal mining. To qualify for surface mining, the coal deposits must be within 50-80 meters of the surface. The job of a miner primarily involves removing ‘overburden’— rock, soil, trees etc. – that mix with the coal deposits and cover them near the earth’s surface. They need to clear this material so the layer of coal is clear and available for extraction. Now, let’s look into each of these two mining types in a bit more detail.
Room and pillar and longwall are two dominant methods that account for the vast majority of underground coal mining.
Room And Pillar Mining
In this mining strategy, seams of the coal are mined partially, leaving large pillars of coal intact in a bid to support the overlying layers of rock. When they are done, miners practice what is known as retreat mining. In retreat mining, they extract the maximum amount of coal they can from the remaining pillars on their way out, allowing the roof of the coal seam to collapse.
This mining strategy involves cutting long tunnels into a coal seam and removing the extracted coal using an arrangement of conveyor belts. A temporary hydraulic support system is installed to hold the rock ceiling in place as the miners and machinery move along the coal seam.
Both of these popular underground mining strategies, i.e., room and pillar and longwall mining, are performed with very powerful mining machines that can rapidly cut coal from the face of the seams. These sophisticated machines have gradually replaced more ineffective and risky methods, such as intermittent drilling of the coal seam and blasting with explosives.
Strip mining and mountaintop removal are two popular surface mining strategies when coal seams are located close to the surface of the earth.
In strip mining, the first step is to strip off the vegetation and soil in the vicinity of the surface to be mined for coal. The large intermediate layer of sediment and rock, i.e., the ‘overburden’ is then blasted and removed using large trucks. Once exposed, the underlying coal seam is excavated in strips and transported out using a system of conveyor belts or trucks. The strip mining process relies heavily on large machinery and requires far fewer workers per unit of coal.
Mountaintop Removal (MTR) Mining
Mountaintop removal or MTR, in short, is arguably the most destructive style of coal mining. It is currently practiced in a few colliery operations in Virginia and Kentucky. It requires stripping all the trees from a mountaintop and then blasting off the top of the mountain with explosives to uncover the coal seams beneath.
The debris generated from this blasting is usually dumped into adjacent valleys, which causes irrevocable damage to the local environment. MTR methods leave behind flattened areas with soils that can barely support grass, let alone trees, foliage and wildlife.
Despite being the major engine powering America’s copious energy needs in the past, coal consumption in the US is presently on the decline. It is largely being replaced by other fossil fuels and natural gases, as well as renewable energy sources like solar and wind power. Four main coal companies that were collectively worth close to $34 billion in 2011 are now worth only $150 million!
How well do you understand the article above!