How Do Geologists Find Minerals Buried So Deep In The Earth?

Table of Contents (click to expand)

Geologists study anomalies in the geophysical and chemical properties of the earth to look for minerals according to their properties.

There is a need to identify and exploit the mineral strength of a nation to run certain parts of its economy. From precious metals to natural gas and petroleum, geologists are always on the lookout for new ore reserves (ores are substances found in nature that are used to extract minerals with commercial worth).

The process of looking for mining reserves is called exploration.

To determine if a deposit can be economically recovered, information obtained during exploration is applied to determine the location, size, and nature of the deposit. Exploration is initially conducted over a broad region. It then becomes more targeted as more promising resources are found.

Finding and defining an ore deposit that may be mined requires months or even years of exploration and several different procedures. Only about one in 1,000 exploration ventures provides adequate proof that there is a mineral in the vicinity. Most prospecting initiatives don’t yield any results.


What Is The Basis Of Exploration Activities?

It all starts in a lab. Here, data on the physical and chemical properties of the bedrock is studied to look for a suitable site for a particular type of mineral. Different forms of rock concentrate various metals. When a corporation is hunting for gold deposits, it hunts for rocks that are suitable for gold deposits.

Female,Geologist,Researcher,Analysing,A,Rock,At,Her,Workplace.
Mineral exploration is primarily composed of lab work (Photo Credit : Radu Razvan/Shutterstock)

Geologists then do field research by walking the region and hammering tiny fragments of rock from rock surfaces. A low-flying plane or ground crew carrying measuring equipment can take geophysical measurements.

Exploration surveys use different tools to measure the physical characteristics of the Earth. Imagine a uniform planet with no variations in geological properties. The measured value of gravity, magnetic field or seismic field would be constant, like their theoretical values (the hypothetical value expected from an equation under ideal circumstances).

However, when an ore body exists deep in the earth, its properties disturb the surrounding field and produce differences in the measured value.

For example, the presence of a magnetic ore, such as magnetite, would disturb the Earth’s magnetic field and produce variations in the measured value of a magnetic field from what should have been if the ore was not present. This variation in the measured value from what was expected is called an ‘anomaly’. Geologists look for anomalies to detect suitable ore bodies for mining efforts.

In the year 1844, Michigan government surveyors identified the Marquette Iron Range, which geologists refer to as the Negaunee Iron Formation. It went on to become one of the country’s most successful iron-producing regions. The area’s magnetite and hematite ore were so plentiful and accessible that pieces could be taken right off the surface and delivered straight to steel plants with little processing. It attracted a number of enterprises in a short period of time to start mines and export the valuable material.

Also Read: How Do Archaeologists Choose Excavation Sites?

How Are Magnets And Gravity Employed In Exploration?

Magnetic surveys track anomalies in the Earth’s magnetic field. Various factors, such as the rotation of the Earth or solar radiation, can impact the magnetic field of the earth. However, geologists are able to pinpoint slight changes caused by mineral deposits. They do this by eliminating all external influences from a reading. This method is employed in the search for metallic minerals.

Pomiary magnetometrem transduktorowym
Magnetic survey is carried out using a Magnetometer (Photo Credit : Wikimedia Commons)

Although gravity appears to be the same everywhere, it keeps changing, depending on the location. These variations are because the Earth’s crust is not homogeneous. Geologists measure such changes to predict low- or high-density ore bodies. Diamonds are located using gravity surveys. They are often discovered in distinctive kimberlite pipes. These are denser relative to the surrounding rocks, resulting in an increase in the regional gravity.

Also Read: Why Are Scientists Studying Ancient Magnetism To Understand Earth’s History?

What Are Some Other Common Survey Methods?

Airborne and ground-based survey methods also consist of seismic, electrical, radiometric or electromagnetic surveys.

Unlike the magnetic or gravity method, a seismic survey is an aggressive approach. It employs a source to produce vibrations of high frequency that travel down the crust. To track the time in which these vibrations bounce back, tiny sensors, called geophones, are positioned at the surface. Their readings provide data on the composition of the rocks. This method is common in petroleum and coal prospecting.

Geophysical,Survey,Plane,Fitted,With,External,Radar,And,Electromagnetic,Survey
Airborne surveys are carried out from small aircraft or helicopters flying at low altitudes with measuring equipment on the aircraft (Photo Credit : Steve Lovegrove/Shutterstock)

Another method involves the use of electromagnetic waves. This identifies the location of metallic minerals or the salinity of groundwater. In EM surveys, a magnetic field is generated, which is used to detect the 3-D conductivity variations in the soil and rock near the surface.

There are instances when geophysical methods are not enough, and there is a need for deeper investigations at targeted sites. Scientists then collect samples of soil, rock, or sediment taken during surveys and forward them to a lab for examination.

What Happens After A Potential Mineral Deposit Is Discovered?

The goal of mineral exploration is to determine whether the mineralization is present at levels that warrant commercial extraction. Once a site has been confirmed for a mineral deposit, it is checked and rechecked until the job of the geologist is complete.

Exploration,Rc,Drilling
It is essential to keep looking for new mineral deposits to fulfill the requirements of an ever-growing population (Photo Credit : Adwo/Shutterstock)

However, almost no projects develop into mines. There are various factors at play, like the fact that the discovery might be too tiny or of low quality. The costs could be too cheap, or obtaining a permit could be challenging. The procedure can often take between 20 and 30 years… assuming that everything goes according to plan and that you are successful in finding a mineral deposit and obtaining all the necessary permissions!

How well do you understand the article above!

Can you answer a few questions based on the article you just read?

References (click to expand)
  1. Understanding minerals exploration - Earth Resources. earthresources.vic.gov.au
  2. Common Ground. New South Wales
  3. Chapter 1: An introduction to minerals, ore and exploration. Geological Survey of Sweden
  4. RFYRH Campbell. geophysical methods in exploration and. The United States Geological Survey
Help us make this article better
About the Author

Pranjali is pursuing her Bachelor’s degree in Geology from Hansraj College, University of Delhi. She enjoys travelling to places and exploring new music. As a creative person, she likes to paint, but usually not on paper. Her keen interest lies in Earth Sciences & Wildlife Conservation. Her favourite pastime is hanging out with her four-legged companions.

.